All Han FSP CUT593P Chassis, Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White Power Supply Unboxing

At COMPUTEX 2023, FSP showed its new flagship chassis, the CUT593P, to gamers. The CUT593P's pre-installed cable board is actually a built-in power supply module cable that is secured and routed in a hidden space, so gamers only need to connect the power supply to the cable and install it on the motherboard and other devices. Gamers just need to connect the power supply to the power extension cable and install it on the motherboard and other devices, the internal hardware compatibility is also quite good to support the top 360 mm water cooling and long graphics card installation space, independent space is compatible with the top hamburger water cooling installation method, the CUT593P even launched two different front panel design, no matter how to choose there will be one that you will like!

 

FSP CUT593P Case Specifications.

Dimensions: 500 (L) x 230 (W) x 544 (H) mm
Color: Black, White
Material: steel, tempered glass
Motherboard: ATX, Micro-ATX, Mini-ITX
CPU air cooling: up to 175 mm
Display card: 400 mm
Power supply: ATX 170 mm
Fan Mounting Positions (Side+Up+Back+): 140 mm 3+2+1 pcs, 120 mm 3+3+1 pcs
Water-cooling support: front 360 / 280 mm, top 360 / 280 mm
Chassis I/O Ports: 2x USB 3.2 Gen1, USB 3.2 Gen2 x2 Type-C, HD AUDIO
Hard drives and bays: three 2.5", one 3.5", two 2.5 / 3.5" composite

 

FSP CUT593P Chassis Unboxing

The FSP CUT593P chassis looks round, but the body is actually a bit bigger, measuring 500 x 230 x 544 mm in length, width and height than most mid-tower chassis.

There are two models in the FSP CUT593 series: the CUT593 and the CUT593P. The CUT593P comes with modular cables and four ARGB 14 cm fans, as well as two interchangeable magnetic front panels and dual glass side panels. The CUT593, on the other hand, comes with four 14 cm non-glare fans, but without the modular cables, replaceable magnetic front panel, and dual-glass side panels, it's up to the gamer to choose whether or not he or she wants to have these features and RGB lighting effects.

The dimensions of the ∆ FSP CUT593P are 500 x 230 x 544 mm.

 

The pre-installed plastic front panel features a large air intake, and the entire plastic front panel consists of multiple hexagonal holes arranged in an array of combinations, with an inner dust filter, but it's a shame that you can't remove the filter from the panel to clean it individually.

∆ The plastic front panel has more air intake compared to the other front panel.

∆ Engraved FSP logo.

∆ Magnetic fixing for easy disassembly.

 

The FSP CUT593P comes with an extra metal front panel, while the CUT593 only comes with a plastic front panel. The metal front panel has smaller holes, but still has more holes to provide adequate cooling performance.

The ∆ front panel option is only available for the CUT593P.

∆ Metal front panel.

 

The glass on the side of the case uses a hinged pivot structure with a strong magnet to hold it in place, and an FSP label on the corner of the glass helps to open the side panel, while the fully transparent, reinforced glass allows for a clear view of the hardware details even when the case is not powered on.

∆ Fully transparent tempered glass.

∆ Using a hinged spindle structure.

∆ Door Opening Aid Label.

 

The FSP CUT593P also utilizes the same under-mounted power supply mounting structure used by most chassis today, with a 12 / 14 cm fan mounted at the rear. However, the FSP CUT593 series chassis come with a 14 cm fan pre-installed, making it less likely that the fan will need to be replaced unless there is a preference for aesthetics or branding beliefs.

∆ The rear of the chassis is shown.

∆Supports 7-slot PCIe expansion mounts, you need to remove the side panel when removing the PCIe device.

 

FSP CUT593P is equipped with a double-sided reinforced glass side panel, so it is more of a test for the real power in the whole line of the wire, but FSP CUT593 users don't have to worry about this problem because this side of the FSP CUT593 is not a glass side.

The back of the ∆ FSP CUT593P also features a hinged glass side view to show the entire line space.

∆ Removing the glass side panel display reveals the pre-installed modular wire arrangement.

∆The bottom power compartment also has a dedicated magnetic suction type file plate, but it is easy to fail to hold it in place when facing more wires with only magnets.

∆ The motherboard 24 Pin and CPU 8+8 Pin that every PC will definitely need have been taken care of first.

 

One of the most interesting features of the FSP CUT593P at COMPUTEX 2023 was the pre-installed modular cable. However, at that time, the product was only available with FSP's own power supply, where the cable was connected directly to a fully-modular power slot, rather than the current power extension cable.

FSP said that in order to have better versatility, so from the original module power supply cable into the power supply extension cable way, regardless of the full-module, half-module, straight out of a variety of different home power supply, as long as the cable to the bottom of the modular extension cable, and the top of the cable has already gone to the motherboard can be used to connect to the use of the motherboard.

∆ The modular cable is fixed to the masking plate, so you can remove the whole thing first to run other cables, and then install the modular cable.

∆ The wire grooming comb is secured to the wire mask using a latch.

Dual 8-pin ∆ CPU configurations are not a concern even for high-end motherboards, but it is awkward if the motherboard has 4-pin slots.

 

After removing the cable cover, you can see the back of the chassis, but I personally think it's a pity that the chassis I/O and fan related cables are only threaded and bundled first, and it's a pity that FSP didn't help to fix the cables first.

∆ Rear chassis alignment space display.

∆The undermounted power compartment supports 170 mm long power supply mounts, and more mounting space is available if the front hard drive cage is removed.

∆ Chassis I/O cable.

The ∆ Fan ARGB and DC 3-Pin cables have been daisy-chained and are ready for use when connected to the motherboard.

 

The FSP CUT593P is designed to be expandable with up to six hard drive mounting positions throughout the chassis and three in the rear cable block.

∆ The 2.5" hard disk mounting location on the back of the motherboard.

∆ The hard drive bays in the power compartment can hold 2.5 / 3.5" hard drives on the top shelf; the bottom shelf can only hold 3.5" hard drives.

 

The chassis I/Os are located on the top front of the chassis, and each I/O is clearly labeled with its function, and each slot is equipped with a white dust plug.

∆ Boot button, HDD/Power operation light, Restart button, 2x USB 3.2 Gen1, HD AUDIO, USB 3.2 Gen2 x2 Type-C.

 

The top cover of the chassis is equipped with large metal holes, and after removing the top cover, you can see the upper fan mounting position. The maximum size of the chassis can be installed with water cooling and fans of up to 280 / 360 mm, and there is also an extra space above the chassis to allow users to install hamburger drain cooler mounting.

∆ Large-area metal mesh.

∆ Supports up to 360 / 280 mm water cooler and fan mounting.

∆ There is additional space to install a fan here.

∆ That is to say, the hamburger steak installation will not occupy the interior space.

 

FSP CUT593P Chassis Core Hardware Installation Space

The FSP CUT593P comes with a pre-installed ARGB 14 cm all-white fan. Unlike most cases that come with a 14 cm fan, this case directly gives the largest 14 cm fan enough cooling performance for the interior, making it less necessary to replace the fan in most cases.

A 14 cm ARGB fan is included with the ∆ chassis.

∆ However, it is a pity that the magnetic filter is arranged inside, which can protect the installation space from dust but not the fan itself.

 

Although the FSP CUT593P is quite large, it only supports ATX, Micro-ATX, Mini-ITX motherboards, and is not recommended for E-ATX motherboards used in consumer flagship motherboards, as it will cover the cable routing holes on the right side of the motherboard, which will make it difficult to route the internal modular cables, so the author doesn't recommend installing an E-ATX motherboard.

The FSP CUT593P supports up to 175 mm air cooling tower and 400 mm graphics card mounting, which is why the author said that the FSP CUT593P is bigger, in order to support more space for hardware mounting, the chassis itself will be further enlarged.

∆ ATX, Micro-ATX, Mini-ITX motherboards, 175 mm air-cooled towers, 400 mm graphics card mounting space.

∆The right side of the motherboard supports two 2.5" hard disks for installation.

∆With an E-ATX motherboard, the module cables cannot be routed, so it is not recommended to install an E-ATX motherboard at all.

There are 2.5 / 3.5" composite HDD mounting brackets above the ∆ power compartment, as well as a number of holes that appear to allow for fan mounting (?).

 

The chassis comes with the basic parts in the accessory box: complete line of rubber coils, buzzer, felt harness, motherboard brass post nuts, motherboard plastic struts, and non-partitioning screws.

∆ Accessories at a glance.

 

FSP Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White Power Supply Unboxed

The Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White power supply, which also debuted at COMPUTEX 2023, is a new option for the DAGGER PRO (White Edition) and HYDRO PTM X PRO (White Edition), with an all-white look and feel, as well as all-white embossed cables and white connectors for the modules. The module cables also use all-white embossed cables and white connectors, allowing the white army of consumers to completely whiten their PCs.

 

Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White Power Spec:

Scope: ATX 3.0
Input Voltage: 100-240V
Input Current: 10-5A
Input Voltage Frequency: 50-60Hz
Power Correction PFC: Active PFC
Size: 130 x 150 x 86 mm
Fan: 120 mm FDB Fan
Conversion Rate Certification: 80 Plus Platinum
Power Cables: Fully Modular Cables
Warranty: 10 years
Protection System: OPP/OVP/SCP/OCP/OTP
Cable Connectors: 1x 24 Pin Motherboard Connector, 2x 8 Pin CPU Connector, 1x 12+4 Pin 12VHPWR Connector, 4x 6+2 Pin PCIe Connector, 12x SATA Connector, 3x Molex (Peripheral), 1x Floppy

 

Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White As the name suggests, it naturally complies with the current Intel ATX 3.0 power specification, and has passed the 80 Plus Platinum Conversion Rate Certification as well as a 10-year warranty, etc. The wattage of the white model is only available in 1200W, while the black model has both 1000W and 1200W options. The black model is available in 1000W and 1200W.

∆ 80 Plus Platinum Conversion Rate Certification Test Report.

 

FSP launched many ATX 3.0 power supply models as soon as the ATX 3.0 specification was popularized, so that consumers could replace their PCs with ATX 3.0 power supplies and use them with 12VHPWR cables for the NVIDIA RTX 40 series graphics cards. Compared to other brands that only started to launch the relevant products in May or June, I think FSP's operation is quite good. I think FSP's operation is quite good compared to other brands that have only started launching related products in May or June.

However, in the second half of the year, when there are enough ATX 3.0 power supply models in the product line, it can be seen that FSP has been a little slower in updating its power supply models compared to the same period last year.

Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White also uses industrial grade unique moisture resistant coating technology, all Japanese 450V 105°C industrial grade electrolytic capacitors, +12V single power output design, +5V & 3.3V DC to DC architecture design, ECO fan temperature control switch design, 120mm FDB liquid bearing fan, fully modular flat cable design, multiple protection mechanisms (OCP/OVP/OPP/SCP/OTP) and more. 120mm FDB liquid bearing fan, fully modular flat cable design, multiple protection mechanisms (OCP/OVP/OPP/SCP/OTP), and more.

∆ Product features at a glance.

The ∆ 12VHPWR uses 16AWG wire diameter and has a single supply limit of 600W.

∆ Wire at a glance.

∆ AC/DC specification with temperature controlled fan speed and noise/conversion efficiency graphs.

 

The Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White is the high end of FSP's consumer ATX 3.0 power supply lineup. Compared to most high end power supplies that are 190 mm in length, the Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White has a length that is compressed to 130 mm. The length of Hydro PTM X PRO ATX3 0 PCIe5.0 1200W White is compressed to 130 mm, which is much friendlier to the chassis mounting space.

The ∆ Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White measures 130 x 150 x 86 mm in length, width and height, making it one of the few high-end power supplies with a friendly size.

∆Contents include: power supply body, cable kit, stickers, screws, devil's felt harness, power shorting switch.

∆ Fully modular cable slots, with each slot's function clearly labeled.

∆ AC/DC tables and information on various safety approvals.

 

Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White uses LLC half-bridge resonance structure with DC-DC synchronous rectification design to regulate the voltage, industrial grade 450V 105°C all-Japanese main capacitors, and FSP's unique industrial grade moisture-proof coating technology that has been frequently used in recent years to achieve moisture, dust, rust and other protective effects. The effect of the

∆ 120 mm FDB liquid bearing fan.

When the ∆ECO switch is turned on, the power supply will automatically stop the fan below the load of the 30%, providing the quietest possible operating environment.

 

Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White All the cables are made of white flat cables, and both the cables and connectors are made of white color to make them look better when installed! However, the cables are still a bit hard and flexible, so it takes a bit more effort to complete the cables.

∆ Main board 24 Pin power supply.

Two ∆ CPU 4+4 Pin power supply cables.

Two ∆ PCIe 6+2 power cables.

One ∆ 12VHPWR cable.

∆ 12+4 Pin Maximum power supply limit up to 600W.

∆ Two SATA cables with four SATA connectors on each cable.

∆ One SATA / Molex cable with two SATA and two large 4 Pin.

∆ One SATA / Molex / Floppy cable with two SATA, one large 4 Pin, one Floppy.

∆ AC power cord.

∆ Full-module cable installation demonstration.

 

Actual Installation

After that, I actually installed the FSP CUT593P chassis and Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White power supply, but this time I didn't burn it in due to lack of time.

∆ Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White The short length of the power supply makes it much more compatible when installed in a chassis.

∆ Connect the internal module extension cable directly to the Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White power module cable.

Close-up of ∆ extension cable installation.

∆ However, the 24 Pin modular cable will actually be installed close to the center I/O cable.

∆ CPU power supply cable display.

 

After installing all the wires, you can cover the wire masking plate to make it visually simpler but more testing for the whole wire skills.

∆ The entire space on the back is displayed.

∆ The power compartment can also be directly blocked.

∆ If your motherboard has only 8 Pin slots, remove one 8 Pin cable from the cable comb.

 

Next, the FSP CUT593P chassis and Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White power supply are lit up to show you a little bit of how the CUT593P chassis looks like and how the ARGB lighting works.

∆ The computer turns on and lights up.

∆ Various color variations.

∆After connecting to the motherboard, you can set the lighting effect through the main version software.

∆ ARGB lighting close up.

 

The FSP CUT593P is equipped with a full-transparency tempered glass that allows for a clear view of both the ARGB lighting effects of the hardware itself and the model's layout.

∆ Side-by-side display.

The top side of the ∆ has a built-in AIO water cooler on display, and the author suggests that an external fan on the other side would be better.

∆ model demonstration.

 

Summary & Insights

FSP CUT593P chassis internal modeling group cable can indeed save the whole process and make the rear of the whole line space better look, but also because the masking board and internal modeling group cable have been pre-planned, they will be used to the area on that side, the rest of the PC cable will have to be matched with them to choose to bypass or coexist at the same time, in the whole process of routing users must be very clear about how to set up the routing! The user must be very clear about how to set up the alignment plan during the whole alignment process.

The author also suggests keeping the cables for the rest of the device as simple as possible, as there is less room to hide the cables under the masking plate and the access holes are smaller, so it is not recommended to use more cables for the accessories.

The internal module extension cable itself is a bit hard and not easy to be adjusted, but it is also in line with the original product design concept of CUT593P: "Pre-planning is complete", but it is a pity that the CPU connector is only given two 8 pins and can't be separated into 4+4 pins, so if the motherboards in the hands of the consumers are using 4 pins or 8+4 pins, they may not be able to use the internal module cables. If you have a motherboard with 4 pins or 8+4 pins, you may not be able to use the internal module cables.

The CUT593P chassis' expandability, ARGB fan, and installation compatibility design all show that FSP is targeting this chassis at the "high-end parts" segment, and this positioning is quite in line with its own pricing of around 4,000. Although the price is a bit higher than mainstream mid-tower pricing, the advantage is that you won't need to replace anything after you buy the chassis.

 

The Hydro PTM X PRO ATX3.0 PCIe5.0 1200W White power supply was introduced to add another high-end ATX 3.0 model to the FSP lineup, and the all-white design is designed to satisfy the needs of superficial gamers (such as me) with native 12VHPWR cables, fully-modular white flat cables, 130 mm short body, 80% Plus Platinum Conversion Rate certification, industrial-grade unique moisture-resistant coating technology, and other features that are really attractive to budget-minded consumers who want to build an all-white PC. With native 12VHPWR cables, fully modular white flat cables, 130mm short form factor, 80% Plus Platinum conversion rate certification, and a unique industrial grade moisture resistant coating, it's an attractive option for those who are on a budget and want to build an all-white PC.

However, the FSP full-module cable is still stiff on this power supply, which is not so friendly to users who may need to bend the cable if there is not enough cable space in the chassis, and the number of full-module cables is not as many as the previous power supply that the author unboxed. Hydro PTM PRO ATX3.0 1200W If you are choosing between two power supplies, I would recommend that you base your choice on your expansion needs, whitened appearance, and power length.

 

If you are not familiar with the installation steps, FSP has also uploaded an installation movie for your reference, so if you have any questions, you may want to check it out.