Introducing CRYORIG's Computex 2025 Showcase

CRYORIG, a renowned brand of heat sinks, exhibited a number of new products and technologies of heat sinks at Computex 2025, and this year, with the theme of research idea gear, CRYORIG presented its products with the spirit of research to the audience.

 

During the product introduction, Crydom directly stated that the company's current focus is on server cooling research and development, and after the server side of the research and development and validation, it will then put the relevant technologies into consumer products, such as four heat sources and dual heat sources Vapor Chamber heat spreading plate technology, as well as the Loop Heat Pipe (LHP) technology and so on.

∆ Four heat source contacts are shown.

∆ The relevant specification.

∆ Loop Heat Pipe (LHP).

∆ LHP module specification.

 

For 4U high server space, 4U LIQUID CPU COOLER, 4U Dual Tower, 4U Single Tower, etc. are also available.

∆ 4U LIQUID CPU COOLER All-in-one water cooling.

∆ 4U LIQUID CPU COOLER All-in-one water cooling specification.

∆ 4U Dual Tower air-cooled, 4U Single Tower air-cooled radiators.

 

The Rheo360 and Rheo240 all-in-one watercoolers are positioned in the price-performance category, with the CRYORIG logo on the watercooling head and Infinity Mirror effect, and the ARGB lighting effect and Axis Infinity Mirror on the watercooling fan.

∆ Rheo360, Rheo240 All-in-one water cooling.

∆ Rheo240 All-in-one water cooling specification.

 

The flagship all-in-one water cooler is the CRYO360, which features an LCD circular display that can be customized to show pictures, videos, GIFs, hardware monitoring information, and more.

∆ CRYO360 One-piece water cooling.

The ∆ CRYO360 water cooler uses an LCD round display screen.

∆ Product Features.

∆ CRYO360 One-piece water cooling specification.

 

The downdraft air-cooled C5 cooler is only 54.6 mm tall and will be available in both black and white copper versions.

∆ C5 series products.

∆ White solid brass version.

∆ Black Edition.

∆ The fan is secured with a snap-fastening structure.

 

The C5 series heat sinks utilize a Vapor Chamber to even out the contact surfaces of the heat sinks. In addition to this, Crydom also utilizes a CNC surface finish to create a pattern that has been tested to be effective in increasing the thermal conductivity of the heat sink paste.

∆ Pure copper plate for homogenization.

∆ Black version even hot plate.

The surface roughness of ∆ varies from 1.11 to 1.23 μm for different versions.

∆ CRYORIG says that these were tested on multiple samples and the best solution was chosen.

 

Consumer tower coolers are new to GLADIUS ASTRAL, featuring ten heatpipes, dual towers, ARGB fans and light bars, a small screen for hardware monitoring, and more.

∆ CRYORIG GLADIUS ASTRAL Dual Tower Air-cooled.

∆ Tower top screen display.

∆ Tower display.

∆ Copper bottom contact surface.

 

The mainstream grades are the six-heatpipe CR6S series and the four-heatpipe CR4S series air-cooled.

∆ CR6S series and four heat pipe CR4S series air-cooled.

 

The entry-level H6 single tower is interesting in that, in addition to using six heatpipes in direct contact with the copper tubes, the body is mounted directly in an L-shape, completely avoiding the possibility of memory blockage and allowing for optimal memory compatibility.

∆ H6 Installation Showcase.

∆ Configure the ARGB fan.

The ∆ L-shape is presented.

∆ Six heaters in direct contact.

∆ H6 Specification.

 

After looking at the common forms of cooler updates, followed by a very special LULL silent cooling water cooler, the water cooling head end is the same as the CRYO360 water cooler introduced earlier, but the water cooling pipe and water cooling row is different, the cold row directly use the same area as the side cover, sticking on the outside of the chassis! And no fan is needed to dissipate the heat through the natural airflow, the cooling liquid is driven by the water-cooling head PUMP, and the external LULL demonstrated on the scene can be compatible with most of the chassis side panels, and does not need to be used in a special chassis.

∆ CRYORIG LULL mute system.

∆ The cooling head part is the same as conventional one-piece water cooling.

∆ Water-cooled pipes are connected externally.

∆ Where the water-cooling pipe meets the water-cooling discharge.

 

The internal LULL is connected directly from the inside, which is visually cleaner, but the water cooling module is bound to the chassis itself.

∆ CRYORIG LULL.

∆ Cold platoon display.

∆ Internal version.

∆ The articulation of the internal connection is shown.

The ∆ side probably feels like this.