LIAN LI HydroShift II OLED Curved 360TL with O11 Vision-M Unboxing Review

Unboxing of LIAN LI HydroShift II OLED Curved 360 all-in-one water cooler and O11 Vision-M (O11VMW) chassis, and actually pairing it up with the LIAN LI HydroShift II OLED Curved 360 chassis. AMD Ryzen 9 9950X3D The processor and GIGABYTE B650I AORUS ULTRA motherboard, along with the RTX 4060Ti graphics card were tested for thermal performance.

LIAN LI HydroShift II OLED Curved 360TL(GHS2OLDC36TW) All-in-one water-cooled specification:

Compatible Mounting Intel Pin: LGA 1851 / 1700
Compatible with AMD Pin: AM5 / AM4
Water pump use program: ?
Pump Maximum RPM: Default 2200, Software 100% 2400, Software Turbo Mode 2800 ± 10% RPM
Water-cooled head size: 126.5 × 87.1 × 108 mm
Water-cooling head contact surface: copper
Cold head power supply: PWM 4-Pin, 2-Pin auxiliary power supply, USB 2.0 9-Pin
Size of water-cooling manifold: 400 x 122 x 24 mm (including water-cooling pipe space is 400 x 139 x 24 mm)
Water Cooler Material: Aluminum
Water-cooled tube length: 450/475 mm
Fan used: LIAN LI UNI FAN TL FLEX
Fan size: 124 x 120 x 28 mm
Maximum fan speed: 2600 RPM ±10%
Maximum fan airflow: 90.1 CFM
Maximum fan pressure: 3.97 mmH₂O
Fan power supply: PWM 4-Pin, 2-Pin auxiliary power supply
Heat dissipating cream included: one extra tube included in the kit
Warranty: 6-year warranty on all-in-one water cooling system / 3-year warranty on OLED screen / 3-year warranty on fan

 

LIAN LI O11 Vision-M (O11VMW) Chassis Specifications:

Chassis body size: 419.6 (L) x 275.1 (W) x 395.2 (H) mm
Available colors: black / white
Chassis Material: Steel, Tempered Glass, Aluminum
Supported motherboard sizes: Micro-ATX, Mini-ITX
CPU Cooling Support Height: Up to 162 mm
Graphics card support length: up to 410 mm
Power supply support length: ATX ≤ 182 mm
Fan Mounting Positions (Top + Side + Behind Motherboard + Bottom + Rear): 140 mm 0+0+1+0+0, 120 mm 3+2+2+3+2
Chassis pre-installed fan: 140 mm X1 behind the motherboard
Water-cooled drain support: 360 / 240 mm from above
Chassis I/O Ports: 2x USB-A 5Gbps, USB Type-C 10Gbps, TRRS Composite Headphone Microphone Hole
Maximum hard drive mounts: three 2.5-inch, or one 2.5 plus 3.5-inch combo mount

 

LIAN LI HydroShift II OLED Curved 360TL Unboxing｜Curved OLED All-in-One Watercooling Specification and Feature Analysis

At COMPUTEX 2025, LIAN LI was showcasing the new HydroShift II series of all-in-one water coolers at its booth. After almost a year, the HydroShift II OLED Curved 360 is finally available for sale before COMPUTEX 2026. The HydroShift II OLED Curved 360 is available in UNI FAN TL FLEX, UNI FAN P28 V2 and fanless versions depending on the fan model.

According to the Taiwan sales channel price is 10599 (TL FLEX), 9399 (P28 V2), 8499 (fanless version), and each of them have their own black and white color to match with the device, and there is no price difference between the respective black and white.

The HydroShift II OLED Curved 360 (HydroShift II OLED curved screen) is the white model, and it is the version equipped with UNI FAN TL FLEX fan, the product model number is GHS2OLDC36TW, and the warranty of HydroShift II OLED Curved is 6 years. The HydroShift II OLED Curved's integrated water-cooled cooling system is covered by a 6-year warranty, and the OLED display is covered by a 3-year warranty. However, there is no mention of liquid leakage rules on the product page, so you may need to check with the official customer service for details.

△ LIAN LI HydroShift II OLED Curved 360 All-in-one water cooling.

Example of basic dimensions for water cooling.

△ Basic specification.

△ Main product features.

 

This series of water-cooling is mainly planned for the current mainstream "chassis top-mounted water-cooling installation". The fans and water-cooling pipe routings are already installed at the factory, while the magnetic water-cooling heads are placed separately.

The side-mounted water-cooling piping design fixes the water-cooling pipes along the edges of the water-cooling rows, significantly reducing the exposed area of the water-cooling pipes to minimize the visual clutter inside the chassis, while the PWM and USB connecting cables required for the water-cooling head are directly hidden in the water-cooling pipe braid sleeve, which similarly presents an "almost wireless and hidden water pipe" visual appearance on the side of the radiator, but correspondingly requires adjusting the installation mode according to factors such as the layout and size of the chassis and motherboard. However, the Hydroshift retains the flexibility to adjust the water pipe mounting pattern according to the dimensions of the chassis and motherboard layout.

The water-cooling pipe is wrapped around the side and fixed by three pre-set brackets. The three brackets are fixed with screw holes on the side of the cooler, so players can adjust the bracket position according to the different chassis, or even remove them to adjust the water-cooling pipe alignment.

△ Fan pre-installation is complete.

△ Water-cooled pipe alignment display.

 

The HydroShift II OLED Curved 360 features a water-cooled head, a magnetic hot-swappable OLED Curved curved-screen water-cooled head module measuring 126.5 x 87.1 x 108 mm and 108 mm in height, and a 6.67-inch OLED display with 2288 x 1048 resolution, 500 nit The cooler is a 6.67" OLED display with 2288 x 1048 resolution, 500 nit brightness, and 60Hz refresh rate.

This water cooler supports Intel LGA 1851 / 1700 and AMD AM5 / AM4 platforms. The pump PUMP can reach a maximum speed of about 2200 RPM when used without software, and about 2400 RPM if the PUMP is set to 100% in L-Connect 3 software, but can reach a maximum speed of 2800 RPM if Turbo Mode is enabled in L-Connect 3 software. However, if "Turbo mode is enabled in L-Connect 3 software", the maximum speed can reach 2800 RPM. Therefore, if you want to fully utilize the cooling performance of this water-cooling system, it is recommended to enable Turbo mode in L-Connect 3 software.

△ Metal contacts on the screen.

△ The cold head is covered with a scratch-resistant protective film.

△ List of cables required for water cooler installation.

 

LIAN LI's own software provides a wide range of 2D and 3D themes to apply by default, as well as flexible dual- and triple-split screen layout settings to maximize the use of screen real estate. Gamers can split curved OLED displays into multiple independent zones for complete customization, and you are free to choose from a variety of personalized background images, animations, or static hardware metrics monitors to display.

This water cooling head has electric vertical and horizontal adjustment settings. With L-Connect 3 software, you can set the left/right angle and top/bottom height to adjust the display to any chassis, which is not a feature of water cooling on the market today.

△ Surface screen.

△ Close-up of the underside of the screen.

△ Close-up of the side of the screen.

△ Magnetic fixing.

 

The size of the water cooler is 400 x 122 x 24 mm, the official web site boasts that it is 3 mm thinner, 3 mm shorter and 2.5 mm narrower than its predecessor, which reduces the space after installation. However, including the space for the side water cooling tubes, the overall water cooler plus fan is 400 x 139 x 52 mm, which means that there are still some requirements for the top water cooling area, and it is recommended to find a case that has a 140 mm fan installed. It is recommended to use a chassis that supports 140 mm fan mounting.

The three mounting brackets at the water-cooling tubes have screw holes at the top, which can be used to fine-tune the 140 mm fan mounting holes and to secure the brackets during installation.

△ Single channel water-cooling, the overall water-cooling to the size of 400 x 139 mm, it is recommended that the chassis above the mounting position to support the native 140 mm space.

△ The total thickness of the water-cooled exhaust and fan is 52 mm.

△ HydroShift II OLED Curved 360TL is paired with a UNI FAN TL Wireless fan.

△ One PWM 4-Pin and one 2-Pin auxiliary power supply is required for the power supply of the fan itself.

 

Accessories include TL fan protector, TL fan adapter 5V 3-Pin ARGB cable, AMD & Intel platform grommet screw base set, brass post screwdriver, SATA 3-part auxiliary cable, fan locking hole decorative piece, L-Wireless controller, thermal paste and spatula, cooling screws, and water-cooling hose clamps.

△ Water-cooled fittings at a glance.

△Freezing cream and spatula are included.

 

LIAN LI HydroShift II OLED Curved 360TL Installation｜Curved screen, water-cooling head, and exterior details.

 

LIAN LI O11 Vision-M Chassis Unboxing｜M-ATX Ocean View Room Design and Appearance Introduction

In the past, the author has unboxed lian li o11 vision 和 LIAN LI O11 Vision Compact Two Vision Series chassis, which feature a dual-chamber design and triple-glass display, and the LIAN LI O11 Vision-M (O11VMW), which is a more compact chassis that supports only M-ATX and ITX motherboards but expands on the top-mounted hidden cooler design.

The O11 VISION-M is available in both O11 Vision-M Standard and O11 VISION-M Digital versions. The O11 VISION-M Digital comes with a built-in 9.2-inch screen and both versions are available in black and white colors, and the dimensions of this chassis are 419.6 x 275.1 x 395.2 The chassis measures 419.6 x 275.1 x 395.2mm.

The chassis I/O slots are located underneath the front of the chassis, so this chassis is more suitable to be placed above the desktop height for more convenient use, and provides: boot key, TRRS composite headphone microphone jack, 2x USB-A 5Gbps, USB Type-C 10Gbps.

△ O11 Vision-M Standard Edition case in white color.

△ Front glass view of the chassis.

△ White glass side panel.

△ Bottom side dust filter.

△ List of chassis I/O ports.

 

The rear of the chassis can support two 120 mm fans, but due to width constraints, it is not possible to install a water cooler in this location.

There are five PCIE device mounting positions configured underneath with reusable baffles. The PCIE slots are designed with crossbars, so pay attention to the compatible parts of the graphics card upright adapter bracket, and you need to confirm if you want to use another brand of upright bracket.

△ The rear view of the chassis.

△ Close-up of the power supply installation area.

 

The back side and top of the motherboard provide mesh holes for the side and top fan mounting locations for intake or exhaust purposes, but there is no magnetic filter underneath, so anyone who cares may want to install one on their own.

The steel side panels on the side of the line space and the top cover of the case are equipped with ventilation grills.

△ There is no dust screen underneath.

 

LIAN LI O11 Vision-M Mounting Space Analysis｜Supporting Specification, Fan and Water Cooling Configuration Explanation

The LIAN LI O11 Vision-M supports Micro-ATX and Mini-ITX sized motherboards, but note that the newer back-plug motherboards "do not support the installation", so you need to avoid it if you want to install it with a back-plug motherboard.

The air-cooled cooler is compatible with heights up to 162 mm and lengths up to 410 mm for graphics card mounting, leaving plenty of room for high-end models with air-cooling and graphics card mounting.

A 140 mm fan is pre-installed at the rear of the motherboard to draw in cold air from the side cover to the upper water cooling, perfecting the cooling airflow planning for the entire chassis. If you want to enhance the cooling effect inside the chassis, the bracket can be expanded with two 120 mm fans to increase the intake airflow. The 120 mm fan mounting also supports hard disk mounting, so you can choose between the hard disk and the two 120 mm fans as needed.

On the right side of the motherboard, there are two 120 mm fan mounting positions that can be expanded, but do not support water cooling.

△ Hardware installation space.

△ Two 120 mm fans can be installed on the side, water-cooling exhaust installation is not supported.

△ Three 120 mm fans can be installed at the bottom of the unit, water-cooling installation is not supported.

A 140 mm fan is pre-installed at the rear of the motherboard.

△ Chassis I/O cable.

 

The only place where the chassis supports water-cooling installation is the upper mounting position. The upper part of the chassis supports 360 / 240 mm fan and water-cooling installation, and there is also no magnetic dust filter, and the upper part of the fan bracket is a detachable design, which can be disassembled individually to facilitate the installation process.

△ Water-cooling installation space on top, with cable routing holes on the aesthetic cover.

The aesthetic mask is detachable and can be removed from the unit if necessary. You can use the 3D printable file on the official website to print a mask with only half of the fan exposed.

The maximum thickness of the upper water cooling installation space is about 55 mm.

△ Accessories box at a glance.

 

LIAN LI O11 Vision-M × HydroShift II OLED Curved 360TL Installation｜Actual Installation and Wire Result

Then we will show you the actual installation of LIAN LI O11 Vision-M(O11VMW) chassis and LIAN LI HydroShift II OLED Curved 360 all-in-one water cooling.

LIAN LI HydroShift II OLED Curved 360 All-in-One Liquid-Cooled AMD AM5 platform with snap-on installation.

When installing the top-mounted water cooler, it is much easier to temporarily remove the upper fan bracket and trim cover of the O11 Vision-M.

When installing the HydroShift II series water cooler in this chassis, it is necessary to remove the water pipe support brackets to ensure sufficient clearance for installation, and care should be taken to ensure that the water cooling pipes and various cables do not come into contact with the fan.

△ Front view angle.

△ LIAN LI HydroShift II OLED Curved 360 water cooler preset effect.

△ Actual installation demonstration.

△ Internal hardware setup.

 

O11 Vision-M × HydroShift II OLED Curved 360TL Cooling Measurement｜AMD Ryzen 9 9950X3D Temperature Performance

Then we also tested the cooling performance of the chassis, with the AMD Ryzen 9 9950X3D The GIGABYTE B650I AORUS ULTRA processor and GIGABYTE B650I AORUS ULTRA motherboard were tested in a closed air-conditioned room at 24°C with the fan slots set to run at full speed in the motherboard BIOS. The test was conducted in a closed air-conditioned room at 24°C. This is for reference only, as it is difficult to control the ambient temperature in a normal room.

The software uses OCCT burn-in tests to simulate temperature data under high load stress conditions on the processor and graphics card, and data collection uses HWiNFO64 to collect and record maximum temperature and power consumption.

Testing Platform

Processor:AMD Ryzen 9 9950X3D
Radiator:LIAN LI HydroShift II OLED Curved 360 (PUMP RPM_2200 RPM)
Cooling cream: water-cooled with
Motherboard: GIGABYTE B650I AORUS ULTRA
Memory:Origin code vortex DDR5 48 GB (24 GBx2)
Graphics: NVIDIA GeForce RTX 4060 Ti Founders Edition 8GB
Power supply:XPG PYLON II 750W
Chassis:LIAN LI O11 Vision-M

△The maximum CPU temperature is 77°C in the double-bake test screenshot; the maximum CPU (Tctl/Tdie) processor package temperature is 77.5°C, and the maximum graphics card temperature is 69.9°C. The maximum CPU temperature in the double-bake test screenshot is 77.5°C, and the maximum graphics card temperature is 69.9°C. The maximum CPU temperature in the double-bake test screenshot is 77.5°C.

 

LIAN LI O11 Vision-M and HydroShift II OLED Curved 360TL Evaluation｜Pros and Cons and Installation Advice

The LIAN LI HydroShift II OLED Curved 360 all-in-one water cooler utilizes a 6.67" 2K 60Hz curved OLED water cooler screen with built-in 3D visual effects, and a motorized structure to adjust the height and left/right angle of the water cooler head.

This water cooler "must" be used with L-Connect 3 software in order to be fully functional. Appearance parts, such as the ARGB lighting effect of the aperture around the water cooler head, will only light up after being read by the software, and the pump PUMP speed must be used with the software in order to increase the speed from 2200 RPM to 2400 RPM, or to 2800 RPM in Turbo Mode, which means that it can only be fully unlocked by using the software. This means that the software can completely unlock the appearance and cooling performance.

 

The LIAN LI O11 Vision-M (O11VMW) chassis is a bit of a shame, you can see that LIAN LI wants to cram a lot of features into a small chassis, but if there are more hardware devices (multiple fans and hard drives), it will require more effort on cabling, and it's a shame that it doesn't support backplane motherboards, which are becoming more and more common in the M-ATX world. M-ATX backplane motherboards are becoming more and more popular.

For cooling expansion, the author suggests that the fan mounts on the back and side of the motherboard be filled with UNI FAN series (to minimize the use of cables and controllers) to enhance the air intake of the top-mounted water-cooling, and at the same time, it can be used to cover up the ugly purpose as well.

In terms of matching, the author thinks that LIAN LI O11 Vision-M is not a good match for HydroShift series because this chassis needs to bend the water-cooling tubes for top-mounted water-cooling, and since the water-cooling tubes have to be changed according to the chassis, it is better to match it with a normal water-cooling device such as the GALAHAD series, and it doesn't need to dismantle water-cooling tube brackets like HydroShift series water-cooling. The HydroShift series of water cooling requires the removal of the water cooling tube brackets, which will make the original features of the HydroShift series of water cooling disappear.